av刹车在线观看,在线国产一二三区,无吗中文字幕黄色Av,92久久高清,亚洲丝袜在线视频,日本中文黄色字幕,一区二区三区狠狠操,天堂AV久久网,久草亚洲色图在线视频

Product overview:

This pump is a single-stage single-suction vertical centrifugal pump, the main components are volute, impeller, pump seat, pump shell, support tube, motor seat, motor and other components.Volute, pump seat, motor seat, impeller nut is cast iron, corrosion resistance, corrosion resistance is good, convenient processing technology.

The impeller has three single curved blades with semi-closed impeller and malleable cast iron, so it has high strength and corrosion resistance.Processing convenience, good through, high efficiency.

In order to reduce weight and reduce turning, the pump shaft is made of high quality carbon steel.

Four frame oil seal and shaft sleeve are installed in the pump seat to prevent shaft wear and prolong the service life of the shaft.

The pump can be used vertically or obliquely, covers a small area, the volute needs to be buried in the working medium, easy to start, no bow I water, the rotation direction should be clockwise from the motor tail.

Switchboard length with a variety of specifications, so that the use of units according to local conditions to choose.

Main USES:

1, NL type multipurpose submerged pump is a single-stage single-suction centrifugal pump is used in mining, paper making, printing and dyeing, environmental protection, graphite, mica, gold, ceramic, oil refining, petroleum, chemical industry, farms, saltworks, iodine, dyeing, brewing, food, chemical fertilizer, coking, mill plant, building, marble factory, mine, mud, sand, muddy ponds, sewage pond, dreggy liquid thick liquid, sewage, charging and suspended matter can also be used for mine drainage and the fluid containing clods.

2. If it is combined with high pressure water pump and water gun to form hydraulic mechanized earthwork unit, it can be used for land leveling, river and pond dredging, excavation and transportation of small water conservancy projects, as well as urban air defense projects and underground projects.

3. Fish culture is used to clear the pond with water and increase oxygen in the fish pond.

Instructions:

1, the pump power supply must be three-phase four-wire system, if there is no grounding wire, must be installed to prevent leakage of electricity.When working, the circuit fuse and opening corresponding to the motor should be installed nearby to prevent the motor from burning out when the impeller debris gets stuck.

2. The pump can operate without installing any basic device when it is in use, as long as it leans firmly and is fastened with ropes when necessary to prevent accidents.The rotation direction of the motor must be checked after starting, and it shall not be reversed for more than one minute.

3, when the suction of the liquid contains more weeds, wire, wood, bricks and other sundries, must be removed as far as possible in advance, and can take measures to put the wire basket, to prevent sundries inhalation pump impeller damage, stuck and pipe obstruction and other accidents.

4. The pump body should be provided with short-term water absorption after suction of mud and other dirty substances, so as to flush the pump body and pipe interior.

5. When working in the open air, the motor should be equipped with a protective cover to prevent rain from penetrating the motor.

6, at the bottom of the river, the bottom of the pool suction mud should be suspended on a tripod, and can be put on the buoy or the ship to move the operation, when carrying out earthwork work, the diameter of the earth block broken by high-pressure water shall not be more than one third of the suction inlet.

7, the specified speed of the pump is the highest speed of the pump, not arbitrarily increase;Speed reduction is not limited to use, but the effect is significantly reduced.

8, the pump in the absorption of thick mud, thick liquid or high lift, long distance mud delivery, load reduction, but can not change the structure of the method to increase the load.

9. Generally operate for about 1250 hours, carry out regular maintenance of the pump, remove the pump seat to check the sealing condition of the bearing and sewage lifting pump, clean and replace the butter, and replace the oil seal, axle sleeve and other parts when necessary.Please refer to installation for notes on maintenance and replacement of parts.(use mechanical seal pump rotation about 3500 hours for regular maintenance).

10. When it is stopped for a long time, the volute should be removed, dry the parts and coated with oil on the relatively moving joint surface, and stored in a dry place for later use

Model Significance:

Performance parameters: